Merge branch 'rs/archive'
[git/builtin-gsoc.git] / git-rebase.sh
blobc9942f24009bd01ee0fee8990f64e64d9e43364c
1 #!/bin/sh
3 # Copyright (c) 2005 Junio C Hamano.
6 USAGE='[--interactive | -i] [-v] [--onto <newbase>] <upstream> [<branch>]'
7 LONG_USAGE='git-rebase replaces <branch> with a new branch of the
8 same name. When the --onto option is provided the new branch starts
9 out with a HEAD equal to <newbase>, otherwise it is equal to <upstream>
10 It then attempts to create a new commit for each commit from the original
11 <branch> that does not exist in the <upstream> branch.
13 It is possible that a merge failure will prevent this process from being
14 completely automatic. You will have to resolve any such merge failure
15 and run git rebase --continue. Another option is to bypass the commit
16 that caused the merge failure with git rebase --skip. To restore the
17 original <branch> and remove the .dotest working files, use the command
18 git rebase --abort instead.
20 Note that if <branch> is not specified on the command line, the
21 currently checked out branch is used. You must be in the top
22 directory of your project to start (or continue) a rebase.
24 Example: git-rebase master~1 topic
26 A---B---C topic A'\''--B'\''--C'\'' topic
27 / --> /
28 D---E---F---G master D---E---F---G master
31 SUBDIRECTORY_OK=Yes
32 . git-sh-setup
33 set_reflog_action rebase
34 require_work_tree
35 cd_to_toplevel
37 RESOLVEMSG="
38 When you have resolved this problem run \"git rebase --continue\".
39 If you would prefer to skip this patch, instead run \"git rebase --skip\".
40 To restore the original branch and stop rebasing run \"git rebase --abort\".
42 unset newbase
43 strategy=recursive
44 do_merge=
45 dotest=$GIT_DIR/.dotest-merge
46 prec=4
47 verbose=
48 git_am_opt=
50 continue_merge () {
51 test -n "$prev_head" || die "prev_head must be defined"
52 test -d "$dotest" || die "$dotest directory does not exist"
54 unmerged=$(git ls-files -u)
55 if test -n "$unmerged"
56 then
57 echo "You still have unmerged paths in your index"
58 echo "did you forget to use git add?"
59 die "$RESOLVEMSG"
62 cmt=`cat $dotest/current`
63 if ! git diff-index --quiet HEAD
64 then
65 if ! git-commit -C "$cmt"
66 then
67 echo "Commit failed, please do not call \"git commit\""
68 echo "directly, but instead do one of the following: "
69 die "$RESOLVEMSG"
71 printf "Committed: %0${prec}d " $msgnum
72 else
73 printf "Already applied: %0${prec}d " $msgnum
75 git rev-list --pretty=oneline -1 "$cmt" | sed -e 's/^[^ ]* //'
77 prev_head=`git rev-parse HEAD^0`
78 # save the resulting commit so we can read-tree on it later
79 echo "$prev_head" > "$dotest/prev_head"
81 # onto the next patch:
82 msgnum=$(($msgnum + 1))
83 echo "$msgnum" >"$dotest/msgnum"
86 call_merge () {
87 cmt="$(cat $dotest/cmt.$1)"
88 echo "$cmt" > "$dotest/current"
89 hd=$(git rev-parse --verify HEAD)
90 cmt_name=$(git symbolic-ref HEAD)
91 msgnum=$(cat $dotest/msgnum)
92 end=$(cat $dotest/end)
93 eval GITHEAD_$cmt='"${cmt_name##refs/heads/}~$(($end - $msgnum))"'
94 eval GITHEAD_$hd='"$(cat $dotest/onto_name)"'
95 export GITHEAD_$cmt GITHEAD_$hd
96 git-merge-$strategy "$cmt^" -- "$hd" "$cmt"
97 rv=$?
98 case "$rv" in
100 unset GITHEAD_$cmt GITHEAD_$hd
101 return
104 git rerere
105 die "$RESOLVEMSG"
108 echo "Strategy: $rv $strategy failed, try another" 1>&2
109 die "$RESOLVEMSG"
112 die "Unknown exit code ($rv) from command:" \
113 "git-merge-$strategy $cmt^ -- HEAD $cmt"
115 esac
118 finish_rb_merge () {
119 rm -r "$dotest"
120 echo "All done."
123 is_interactive () {
124 test -f "$dotest"/interactive ||
125 while case $#,"$1" in 0,|*,-i|*,--interactive) break ;; esac
127 shift
128 done && test -n "$1"
131 is_interactive "$@" && exec git-rebase--interactive "$@"
133 while case "$#" in 0) break ;; esac
135 case "$1" in
136 --continue)
137 git diff-files --quiet || {
138 echo "You must edit all merge conflicts and then"
139 echo "mark them as resolved using git add"
140 exit 1
142 if test -d "$dotest"
143 then
144 prev_head="`cat $dotest/prev_head`"
145 end="`cat $dotest/end`"
146 msgnum="`cat $dotest/msgnum`"
147 onto="`cat $dotest/onto`"
148 continue_merge
149 while test "$msgnum" -le "$end"
151 call_merge "$msgnum"
152 continue_merge
153 done
154 finish_rb_merge
155 exit
157 git am --resolved --3way --resolvemsg="$RESOLVEMSG"
158 exit
160 --skip)
161 if test -d "$dotest"
162 then
163 git rerere clear
164 prev_head="`cat $dotest/prev_head`"
165 end="`cat $dotest/end`"
166 msgnum="`cat $dotest/msgnum`"
167 msgnum=$(($msgnum + 1))
168 onto="`cat $dotest/onto`"
169 while test "$msgnum" -le "$end"
171 call_merge "$msgnum"
172 continue_merge
173 done
174 finish_rb_merge
175 exit
177 git am -3 --skip --resolvemsg="$RESOLVEMSG"
178 exit
180 --abort)
181 git rerere clear
182 if test -d "$dotest"
183 then
184 rm -r "$dotest"
185 elif test -d .dotest
186 then
187 rm -r .dotest
188 else
189 die "No rebase in progress?"
191 git reset --hard ORIG_HEAD
192 exit
194 --onto)
195 test 2 -le "$#" || usage
196 newbase="$2"
197 shift
199 -M|-m|--m|--me|--mer|--merg|--merge)
200 do_merge=t
202 -s=*|--s=*|--st=*|--str=*|--stra=*|--strat=*|--strate=*|\
203 --strateg=*|--strategy=*|\
204 -s|--s|--st|--str|--stra|--strat|--strate|--strateg|--strategy)
205 case "$#,$1" in
206 *,*=*)
207 strategy=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
208 1,*)
209 usage ;;
211 strategy="$2"
212 shift ;;
213 esac
214 do_merge=t
216 -v|--verbose)
217 verbose=t
219 --whitespace=*)
220 git_am_opt="$git_am_opt $1"
222 -C*)
223 git_am_opt="$git_am_opt $1"
226 usage
229 break
231 esac
232 shift
233 done
235 # Make sure we do not have .dotest
236 if test -z "$do_merge"
237 then
238 if mkdir .dotest
239 then
240 rmdir .dotest
241 else
242 echo >&2 '
243 It seems that I cannot create a .dotest directory, and I wonder if you
244 are in the middle of patch application or another rebase. If that is not
245 the case, please rm -fr .dotest and run me again. I am stopping in case
246 you still have something valuable there.'
247 exit 1
249 else
250 if test -d "$dotest"
251 then
252 die "previous dotest directory $dotest still exists." \
253 'try git-rebase < --continue | --abort >'
257 # The tree must be really really clean.
258 git update-index --refresh || exit
259 diff=$(git diff-index --cached --name-status -r HEAD)
260 case "$diff" in
261 ?*) echo "cannot rebase: your index is not up-to-date"
262 echo "$diff"
263 exit 1
265 esac
267 # The upstream head must be given. Make sure it is valid.
268 upstream_name="$1"
269 upstream=`git rev-parse --verify "${upstream_name}^0"` ||
270 die "invalid upstream $upstream_name"
272 # Make sure the branch to rebase onto is valid.
273 onto_name=${newbase-"$upstream_name"}
274 onto=$(git rev-parse --verify "${onto_name}^0") || exit
276 # If a hook exists, give it a chance to interrupt
277 if test -x "$GIT_DIR/hooks/pre-rebase"
278 then
279 "$GIT_DIR/hooks/pre-rebase" ${1+"$@"} || {
280 echo >&2 "The pre-rebase hook refused to rebase."
281 exit 1
285 # If the branch to rebase is given, first switch to it.
286 case "$#" in
288 branch_name="$2"
289 git-checkout "$2" || usage
292 if branch_name=`git symbolic-ref -q HEAD`
293 then
294 branch_name=`expr "z$branch_name" : 'zrefs/heads/\(.*\)'`
295 else
296 branch_name=HEAD ;# detached
299 esac
300 branch=$(git rev-parse --verify "${branch_name}^0") || exit
302 # Now we are rebasing commits $upstream..$branch on top of $onto
304 # Check if we are already based on $onto with linear history,
305 # but this should be done only when upstream and onto are the same.
306 mb=$(git merge-base "$onto" "$branch")
307 if test "$upstream" = "$onto" && test "$mb" = "$onto" &&
308 # linear history?
309 ! git rev-list --parents "$onto".."$branch" | grep " .* " > /dev/null
310 then
311 echo >&2 "Current branch $branch_name is up to date."
312 exit 0
315 if test -n "$verbose"
316 then
317 echo "Changes from $mb to $onto:"
318 # We want color (if set), but no pager
319 GIT_PAGER='' git diff --stat --summary "$mb" "$onto"
322 # Rewind the head to "$onto"; this saves our current head in ORIG_HEAD.
323 echo "First, rewinding head to replay your work on top of it..."
324 git-reset --hard "$onto"
326 # If the $onto is a proper descendant of the tip of the branch, then
327 # we just fast forwarded.
328 if test "$mb" = "$branch"
329 then
330 echo >&2 "Fast-forwarded $branch_name to $onto_name."
331 exit 0
334 if test -z "$do_merge"
335 then
336 git format-patch -k --stdout --full-index --ignore-if-in-upstream "$upstream"..ORIG_HEAD |
337 git am $git_am_opt --binary -3 -k --resolvemsg="$RESOLVEMSG"
338 exit $?
341 # start doing a rebase with git-merge
342 # this is rename-aware if the recursive (default) strategy is used
344 mkdir -p "$dotest"
345 echo "$onto" > "$dotest/onto"
346 echo "$onto_name" > "$dotest/onto_name"
347 prev_head=`git rev-parse HEAD^0`
348 echo "$prev_head" > "$dotest/prev_head"
350 msgnum=0
351 for cmt in `git rev-list --reverse --no-merges "$upstream"..ORIG_HEAD`
353 msgnum=$(($msgnum + 1))
354 echo "$cmt" > "$dotest/cmt.$msgnum"
355 done
357 echo 1 >"$dotest/msgnum"
358 echo $msgnum >"$dotest/end"
360 end=$msgnum
361 msgnum=1
363 while test "$msgnum" -le "$end"
365 call_merge "$msgnum"
366 continue_merge
367 done
369 finish_rb_merge